Vf Indicator2; Mode Check Ind - Panasonic AJ-SPX900e Operating Instructions Manual

8-4-5 VF INDICATOR2

Items/ Adjustable
Data Saved Range
P2CARD TOTAL Select the indication mode for the P2 card's
REMAIN ONE-CARD remaining capacity.
TOTAL: Display the total remaining capacity
OFF
ONE-CARD:
Display the remaining capacity of the P2
card currently used for recording.
OFF: Disable the remaining capacity
– C U F E
BATTERY ON Set the battery voltage indication to ON or
OFF.
OFF
– C U F E
AUDIO LVL ON Set the audio lever meter indication to ON or
OFF.
OFF
– C U F E
TC TCG Select the time code to display.
TCG: Display the time code generator
TCR
TCG/TCR
TCR: Display the time code reader value in
OFF
TCG/TCR:
Display the time code generator value in
E-E mode, and the time code reader
value in V-V mode.
OFF: Disable the time code display.
– C U F E
SYSTEM INFO ALWAYS Select the method of displaying system
NORMAL information and warnings.
ALWAYS:
OFF
Always display warnings.
NORMAL:
Display warnings for 3 seconds only
when problems occur.
OFF: Display no warnings other than "TURN
– C U F E
SAVE LED P2CARD Set the SAVE lamp function.
P2CARD:
SAVE
The lamp blinks in synch with the warning
message when the P2 card's remaining
recording capacity is getting low.
SAVE: The lamp lights up when the SAVE
– C U F E
DV ON DV Select whether or not to enable DV
OFF indication when the format is set to DV.
ON: Enable DV indication.
OFF: Disable DV indication.
– C U F E
VOICEMEMO ON Select whether or not to enable the
indication during voice memo recording.
OFF
ON: Enable
OFF: Disable
– C U F E
Remarks
of all P2 cards in slots.
indication.
value in E-E mode.
V-V mode.
POWER OFF" and "SYSTEM
ERROR".
ON/OFF switch is set to ON and the
output system assigned in [8-2-2
OPTION MODE 1] is in the save
mode.
V
indication.
V
indication.
V
Items/ Adjustable
Data Saved Range
REC STATUS ON Select whether or not to enable "REC"
indication in the viewfinder and on the LCD
OFF
monitor during recording.
ON: REC indication enabled.
OFF: REC indication not enabled.
<Note>
This option is useful when the AJ-SPX900E
is used independently. When a 26-pin
extender, external VTR, or Triax is
connected, settings are subject to the setting
of the menu option REC TALLY in SYSTEM
– C U F –
MODE.
PROXY REC ON When a video encoder card (AJ-YAX800G,
optional) is attached, proxy recording
OFF
information is displayed when recording
starts.
ON: Display indicating whether proxy
recording is to be performed on the P2
card only, or on both the P2 card and
the SD memory card.
OFF: Proxy recording information is not
displayed.
– C U F –

8-4-6 MODE CHECK IND

Items/ Adjustable
Data Saved Range
STATUS ON Select whether or not to display the status
indication during MODE CHECK.
OFF
– C U F E
!LED ON Select whether or not to display the cause
indication screen when the ! LED turns on
OFF
during MODE CHECK
– C U F E
FUNCTION ON Select whether or not to display the
FUNCTION indication screen during MODE
OFF
CHECK.
– C U F E
AUDIO ON Select whether or not to display the AUDIO
indication screen during MODE CHECK.
OFF
– C U F E
P.ON IND ON Select whether or not to display the status
indication screen after the power is turned
OFF
ON.
– C U F E
The ____ in the Adjustable Range column indicates the preset
mode.
Remarks
Remarks
111
8