TP-Link EAP115 User Manual page 85

RADIUS Enter the shared secret of RADIUS server to access the RADIUS server.
Password:
Group Key Specify the group key update period in seconds. The value can be either 0 or
at least 30. 0 means no update.
Update period:
NOTE:
Encryption type TKIP is not supported in 802.11n mode. If TKIP is applied in 802.11n mode, the
clients may not be able to access the wireless network of the EAP. If TKIP is applied in 11b/g/n
mode (in the 2.4GHz frequency band), the device may work at a low transmission rate.
WPA-PSK

Based on pre-shared key, security mode WPA-PSK is characterized by high security and simple
configuration, which suits for common households and small business. WPA-PSK has two
versions: WPA-PSK and WPA2-PSK.
Version:



Encryption: Select the encryption type, including Auto, TKIP, and AES. The default setting is
Auto, which can select TKIP (Temporal Key Integrity Protocol) or AES (Advanced
Encryption Standard) automatically based on the wireless station's capability
and request. AES is more secure than TKIP and TKIP is not supported in 802.11n
mode. It is recommended to select AES as the encryption type.
Wireless Configure the WPA-PSK/WPA2-PSK password with ASCII or Hexadecimal
characters. For ASCII, the length should be between 8 and 63 characters with
Password:
combination of numbers, letters (case-sensitive) and common punctuations. For
Hexadecimal, the length should be 64 characters (case-insensitive, 0-9, a-f, A-F).
Group Key Specify the group key update period in seconds. The value can be either 0 or at
least 30. 0 means no update.
Update Period:
Figure 7-8 Security Mode_WPA-PSK
Auto: Select WPA or WPA2 automatically based on the wireless station's
capability and request.
WPA: Pre-shared key of WPA.
WPA2: Pre-shared key of WPA2.
77