TP-Link EAP115 User Manual page 51

Queue:
Arbitration Inter-
Frame Space:
Minimum
Contention
Window:
Maximum
Contention
Window:
Maximum Burst
6.3.5.2 Station EDCA Parameters
Station EDCA parameters affect traffic flowing from the client station to the EAP device.
Figure 6-39 AP EDCA Parameters
Displays the transmission queues: Data 0>Data 1>Data 2>Data 3.
A wait time for data frames. The wait time is measured in slots. Valid values
for AIFS are from 1 to 15.
An input to the algorithm that determines the initial random backoff wait
time (window) for retry of a transmission.
The upper limit (in milliseconds) for the doubling of the random backoff
value.
This parameter applies only to traffic flowing from EAP to the client station.
This value specifies (in milliseconds) the maximum burst length allowed for
packet bursts on the wireless network. A packet burst is a collection of
multiple frames transmitted without header information. The decreased
overhead results in higher throughput and better performance. Valid values
for Maximum Burst are from 0 to 8192 and should be exactly divided by 32.
43