TP-Link EAP115 User Manual page 105

Click to scan rogue APs. Make sure you have enabled Rogue AP Detection and
saved the setting before you click the button.
Action: Click Known to move the AP to the Trusted AP List. After the configurations are
saved, the moved AP will not be displayed in the Detected Rogue AP List.
MAC: The MAC address of the rogue AP.
SSID: The SSID for the rogue AP.
Band: Displays the frequency band which the wireless network of the rogue AP operates
at.
The channel on which the rogue AP is currently broadcasting.
Channel:
Security: Displays the enabling or disabling of the security mode of the wireless network.
Beacon The beacon interval used by the rogue AP.
Interval:
Beacon frames are transmitted by an AP at regular intervals to announce the
existence of the wireless network. The default behavior is to send a beacon frame
once every 100 milliseconds (or 10 per second).
Signal: The strength of the radio signal emitting from the rogue AP.
7.2.6.3 Trusted AP List
Information about the trusted APs is displayed in the list.
Action: Click Unknown to move the AP out of the Trusted AP List.
Figure 7-35 Detected Rogue AP List
Figure 7-36 Trusted AP List
97