TP-Link EAP115 User Manual page 27

Enable: Check the box to enable SSID Override.
VLAN: Check the box to enable VLAN and set a VLAN ID (ranges from 0 to 4094) to the
wireless network. VLAN 0 means VLAN function is disabled. Wireless networks
with the same VLAN ID are grouped to a VLAN.
SSID: Enter an easily-identified SSID to override the SSID shared with other clustered
EAPs.
Password: Set a WPA2-PSK password to access the wireless network. Only previous
passwords with PSK encryption can be overridden.
Figure 6-9 SSID Override
19