TP-Link EAP115 User Manual page 116

7.4.1.2 Log Settings
You can choose the way to receive system logs in Log Settings zone, where these parameters can
be configured: Enable Auto
Enable Auto Mail

If Auto Mail is enabled, system logs will be sent to a mailbox. The following content will be shown.
From:
To:
Figure 7-52 Log List
Mail, Enable Server
Figure 7-53 Log Settings
Figure 7-54 Enable Auto Mail
Enter the sender's email address.
Enter the recipient's email address, which will receive the system logs.
and Enable Nvram.
108