TP-Link EAP115 User Manual page 109

Wireless Settings

Channel/Frequency:
Channel Width:
IEEE802.11 Mode:
Max TX Rate:
Transmit Power:
LAN Information

MAC Address:
IP Address:
Subnet Mask:
LAN Port:
Figure 7-41 Wireless Settings
Displays the channel number and the operating frequency. If you want
to change them, please refer to
Displays the spectral width of the radio channel used by the device. If
you want to change it, refer to
Displays the radio standard used for operation of your device. If you
want to change it, refer to
Displays the maximum data rate at which the device should transmit
wireless packets.
Displays the maximum average transmit power of the device. If you
want to change it, refer to
Figure 7-42 LAN Information
Displays the MAC address of the device.
Displays the IP address of the device.
Displays the subnet mask of the device.
Displays the maximum transmission rate and duplex mode (half-duplex or
full-duplex) of the port.
5.1.1 Wireless Basic
5.1.1 Wireless Basic
5.1.1 Wireless Basic
5.1.1 Wireless Basic
101
Settings.
Settings.
Settings.
Settings.