Juniper MX960 Quick Start Manual page 5

Tools Required to Unpack and Prepare the MX960 Router for Installation
Copyright © 2015, Juniper Networks, Inc.
Figure 1: MX960 Rack Clearance and Router Dimensions
To unpack the router and prepare for installation, you need the following tools:
A mechanical lift—recommended
Phillips (+) screwdrivers, numbers 1 and 2
2.5 mm flat-blade (–) screwdriver
7/16-in. (11 mm) torque-controlled driver or socket wrench
1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the shipping
pallet
Electrostatic discharge wrist strap
Antistatic mat
Proceed to "Step 2: Install the Mounting Hardware" on page
Tools Required to Unpack and Prepare the MX960 Router for Installation
6.
5