Juniper MX960 Quick Start Manual page 17

Copyright © 2015, Juniper Networks, Inc.
Figure 8: MX960 with High-Capacity AC Power Supplies Installed
Air exhaust
AC Power
supplies
Power supply
ejectors
Protective earthing
If necessary, pull the spring-loaded locking pin in the release lever away from the
chassis and turn the release lever counterclockwise until it stops. Let go of the locking
pin in the release lever. Ensure that the pin is seated inside the corresponding hole in
the chassis.
On the power supply, rotate the metal cover away from the input mode switch to
3.
expose the switch.
Move the input mode switch to position 0 for one feed or position 1 for two feeds (see
4.
Figure 9 on page 18).
Connect Power to an AC Router with High-Capacity Power Supplies
Input mode switch
ESD point
17