Opening A Case With Jtac; Revision History - Juniper MX960 Quick Start Manual

MX960 3D Universal Edge Router Quick Start

Opening a Case with JTAC

Revision History

Copyright © 2015, Juniper Networks, Inc. All rights reserved.
Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United
States and other countries. The Juniper Networks Logo, the Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All other
trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify,
transfer, or otherwise revise this publication without notice.
34
To verify service entitlement by product serial number, use our Serial Number Entitlement
(SNE) Tool:
https://tools.juniper.net/SerialNumberEntitlementSearch/
You can open a case with JTAC on the Web or by telephone.
Use the Case Management tool in the CSC at
Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).
For international or direct-dial options in countries without toll-free numbers, visit us at
http://www.juniper.net/support/requesting-support.html
January 2015—530-040795. Revision 1. Minor updates.
April 2011—Added high-capacity power information.
January 2011—530-038425. Revision 1. Corrected installation illustration.
August 2010—530-036124. Revision 1. Updated information about MPCs and MICs.
December 2009—530-032429. Revision 1. Updated maximum torque rating and
installation procedures.
July 2009—530-031139. Revision 1. Updated procedure for connecting DC power. Updated
information about FPCs and PICs.
April 2008—Removed automatic shutdown note. Updated procedures to connect power
and ground. Minor updates.
April 2007—530-021108. Revision 1. Added additional safety information and DC input
voltages. Updated the connect DC power procedure.
March 2007—530-017574. Revision 1. Initial release.
http://www.juniper.net/cm/
Copyright © 2015, Juniper Networks, Inc.
.