Konica Minolta BIZHUB 226 User Manual page 142

7
Message
[PAPER SIZE ERROR RESET
PAPER(#XXX)]
[MEMORY FULL(PRESS ANY
KEY)]
[MAINTENANCE CALL(M1)
CALL SERVICE]
[MAINTENANCE CALL(M2)
CALL SERVICE]
[MACHINE TROUBLE SERVICE
CALL (CXXXX)]
7-6
Major messages and troubleshooting
Cause
The paper loaded into the tray
does not match the specified
size. "#" indicates a tray, and
"XXX" indicates the paper size.
Image data scanned by the
scanner caused a memory over-
flow.
Image data received from the
computer has caused a memory
overflow.
Maintenance is due.
The time for replacement of
Drum Unit.
An error has occurred in this ma-
chine.
Correction action
When you use the paper feeder
unit, remove the loaded paper
and load paper according the
procedure in "Loading paper"
(p. 3-8).
When you are using custom size
paper, refer to "Making copies
on custom size paper" (p. 4-17).
When you use Bypass Tray, re-
move the loaded paper and load
paper according to the proce-
dure in "Loading plain paper in
the Bypass Tray" (p. 4-11).
Press any key on the Control
Panel. Or turn off the Main Pow-
er Switch, and turn it on again.
(All scanned data is erased.)
Press any key on the Control
Panel. Or turn off the Main Pow-
er Switch, and turn it on again.
(All scanned data is erased.)
Contact your service representa-
tive.
Contact your service representa-
tive.
Turn off the Main Power Switch
of this machine, then turn it on
again. If this error recurs, contact
your service representative.
bizhub 226
7.2