Ricoh MP 501SPF User Manual page 36
Hide thumbs
Also See for MP 501SPF:
- Initial manual (4 pages) ,
- Quick installation manual (2 pages) ,
- Technical training manual (84 pages)
Table of Contents
Advertisement
2. Getting Started
4.
Fully insert the interface board.
Check that the interface board is firmly connected to the controller board.
5.
Tighten the two screws to secure the interface board.
6.
Plug in the power cord, and then turn on the machine.
7.
Print the configuration page to confirm that the board was attached correctly.
Installing the IEEE 1284 interface board
1.
Check the contents of the package.
2.
Turn the machine off and unplug the power cord.
34
DPK102
DPK103
Advertisement
Table of Contents
