Ricoh MP 501SPF User Manual page 198

10. Troubleshooting
Message
"Failed to obtain file system." PDF direct printing could not
"File system is full."
"I/O buffer overflow."
"Insufficient Memory"
"Memory Retrieval Error"
If printing does not start, contact your service representative.
• The contents of errors may be printed on the Configuration Page. Check the Configuration Page in
conjunction with the error log. For details about how to print the Configuration Page, see "List / Test
Print", Print.
196
Cause
be performed because the
file system could not be
obtained.
PDF file does not print out
because the capacity of the
file system is full.
An input buffer overflow
occurred.
A memory allocation error
occurred.
A memory allocation error
occurred.
Solution
Turn off the power, and then back on
again. If the message appears again,
contact your service representative.
Delete all unnecessary files from the
hard disk, or decrease the file size sent
to the machine.
• In [Printer Features], under [Host
Interface], select [I/O Buffer],
and then set the maximum buffer
size to a larger value.
• Reduce the number of files being
sent to the machine.
PCL 6
On the printer driver's [Detailed
Settings] tab, click [Print
Quality:Advanced] in "Menu:",
and then select [Raster] in the
"Vector/Raster:" list. In some
cases, it will take a long time to
complete a print job.
Turn off the power and then back on
again. If the message appears again,
replace the RAM. For details about
replacing the RAM, contact your
service representative.