Advertisement
Change the administrator password once the set-up is
complete. Only authorized users should be able to modify
camera settings.
To access the camera online:
1.
In the web browser enter the camera's IP address (default
is 192.168.1.70). The Login dialog box appears.
2.
Enter your user name and password.
Default user name: admin
Default password: 1234
Click Login. The web browser screen appears in live
mode.
3.
Click the
Configuration
select the parameter to change.
Figure 4: Example of a configuration window
Table 1: Overview of the Configuration panel
Configuration folders Description
System
Defines device basic information
including SN and the current
firmware version, time settings, and
maintenance parameters.
Network
Defines the network parameters
required to access the camera over
the internet.
Video/Audio
Defines recording parameters.
PTZ
Defines the PTZ parameters.
Image
Defines the image parameters, OSD
settings, overlay text, and privacy
mask.
Security
Defines who can use the camera,
their passwords and access
privileges, RTSP authentication, IP
address filter, and telnet access.
Events
Defines motion detection, tamper-
proof, alarm input/output, exception,
and snapshot configuration.
Storage
Defines recording schedule, storage
management and NAS
configuration.
.
P/N 1073029-EN • REV A • ISS 03JUN15
tab on the top of the screen and
Specifications
Electrical
Voltage input
24 VAC, PoE+ (IEEE 802.3at)
Power
Pendant housing:
consumption
PoE: Max. 25 W
24 VAC: Max. 65 W
Flush housing: Max. 25 W
Surface housing: Max. 25 W
Miscellaneous
Operating
Pendant housing: PoE+ for -30 to 65 °C
temperature
24 VAC: -40 to +65 °C
Flush housing: -10 to +50 °C
(14 °F to 122 °F)
Surface housing: -10 to +50 °C
(14 to 122 °F)
Dimensions
Pendant housing: Ø 220 × 266 mm
Flush housing: Ø 206 × 251 mm
Surface housing: Ø 180 × 240 mm
Weight
Pendant housing: 3,5 kg
Flush housing: 3 kg
Surface housing: 2,5 kg
Environmental
Pendant housing: IP66
rating
Flush housing: IP54
Surface housing: IP54
Pin definitions
There are eight wires on a standard UTP/STP cable and each
wire is color-coded. The following shows the pin allocation and
color of straight and crossover cable connection:
Figure 5: Straight-through cable
1
White/Orange
2
Orange
3
White-Green
4
Blue
5
White/Blue
6
Green
7
White/Brown
8
Brown
Figure 6: Cross-over cable
1
White/Orange
2
Orange
3
White-Green
4
Blue
5
White/Blue
6
Green
7
White/Brown
8
Brown
Please make sure your connected cables have the same pin
assignment and color as above before deploying the cables in
your network.
White/Orange
1
Orange
2
White-Green
3
Blue
4
White/Blue
5
Green
6
White/Brown
7
Brown
8
White/Orange
1
Orange
2
White-Green
3
Blue
4
White/Blue
5
Green
6
White/Brown
7
Brown
8
5 / 6
Advertisement
