Configure Wrr Queuing - HP A6600 Configuration Manual

Configuration example
Network requirements
1.
Configure GigabitEthernet 1/0/1 to use SP queuing.
Configuration procedure
2.
# Enter system view
<Sysname> system-view
# Configure GigabitEthernet 1/0/1 to use SP queuing.
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos sp

Configure WRR queuing

WRR queuing includes basic WRR queuing and group-based WRR queuing.
With a WRR queue configured on an interface, WRR queuing is enabled on the interface, and other queues
on the interface use the default WRR scheduling value and are assigned to the default WRR priority group.
Configuring basic WRR queuing
To do...
1. Enter system view.
2. Enter
interface
view or port
group view.
3. Enable WRR queuing.
4. Configure a basic WRR
queue.
5. Display WRR queuing
configuration
information on
interfaces.
Command...
system-view
Enter
interface interface interface-type interface-number
view
Enter
port
port-group manual port-group-name
group
view
qos wrr
qos wrr queue-id [ group { 1 | 2 } ] weight
schedule-value
display qos wrr interface [ interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
Remarks
—
Use either command.
Settings in interface view take
effect on the current interface.
Settings in port group view take
effect on all ports in the port
group.
Required.
WRR queuing is only applicable
to Layer 2 interfaces.
The default queuing algorithm on
an interface varies with router
models.
Required.
Optional.
Available in any view.
74