Configuration Task List; Creating And Configuring An Fr Class - HP A6600 Configuration Manual

Configuration task list

Task

Creating and configuring an FR class

Configuring FRTS
Configuring FR traffic policing
Configuring FR congestion management
Configuring FR DE rule list
Configuring FR PVC queuing
Configuring FR fragmentation
Creating and configuring an FR class
The system integrates QoS services on FR PVCs into FR classes to provide a flexible and complete solution for
FR traffic control and service quality. Before configuring QoS services such as FRTS, you must create an FR
class first, and then configure all the QoS parameters in the FR class. Then, associate the FR class with an FR
PVC to apply the set of QoS network service parameters to the FR PVC.
Associate an FR class with one or more PVCs.
An FR PVC providing QoS services searches the FR class in the following order:
 The FR class associated with the FR PVC
 The FR class of the FR interface to which the FR PVC belongs
To configure and create an FR class:
To do...
1. Enter system view.
2. Create an FR class and enter FR class view.
3. Return to system view
4. Associate the
FR class with
interface or
PVC.
Enter FR interface
Associate
view.
FR class
Associate the FR
with
class with
interface.
interface.
Enter FR interface
view.
Associate
FR class Enter FR PVC view.
with PVC.
Associate the FR
class with PVC.
Remarks
Required
Optional
Optional
Optional
Optional
Optional
Optional
Command...
system-view
fr class class-name
quit
interface interface-type
interface-number
fr-class class-name
interface interface-type
interface-number
fr dlci dlci
fr-class class-name
126
Remarks
—
Required.
By default, no FR class is
created.
—
Use either command or all
commands.
By default, no FR class is
associated with an FR PVC or
an FR interface.