Configuring Mpls Congestion Management - HP A6600 Configuration Manual

To do...
3. Configure a match
criterion for the class.
4. Return to system view.
5. Create a traffic behavior
and enter traffic behavior
view.
6. Configure an EXP
re-marking action in the
behavior.
7. Return to system view.
8. Create a QoS policy and
enter QoS policy view.
9. Associate the class with
the traffic behavior in the
policy.
10. Return to system view.
11. Enter interface view.
12. Apply the QoS policy to
the interface.

Configuring MPLS congestion management

By configuring MPLS congestion management, assign packets exceeding the bandwidth to the queues by
priority, and then send these packets according to a certain queue scheduling mechanism, avoiding
dropping packets directly.
Configure PQ and CQ for MPLS.
Configuration prerequisites
Complete basic MPLS configurations. For more information about basic MPLS configurations, see MPLS
Configuration Guide.
Command...
if-match [ not ] mpls-exp
exp-value-list
quit
traffic behavior
behavior-name
remark mpls-exp exp-value
quit
qos policy policy-name
classifier tcl-name behavior
behavior-name
quit
interface interface-type
interface-number
qos apply policy
policy-name { inbound |
outbound }
117
Remarks
Required.
The match criterion applies only to MPLS
packets.
—
—
Required.
—
—
Required.
—
—
Required.