Configuring Gts; Configuring Gts In Policy Approach - HP A6600 Configuration Manual

Configuring traffic policing in non-policy approach
Configuring CAR list-based traffic policing
To do...
1. Enter system view.
2. Configure a CAR list.
3. Enter interface view
4. Configure a CAR list based
CAR policy on the interface.
Configuring traffic policing for all traffic
To do...
1. Enter system view.
2. Enter interface view.
3. Configure a CAR action for all
traffic on the interface.

Configuring GTS

GTS for software forwarding does not support IPv6.
Do not configure GTS on a main interface and its subinterfaces at the same time.

Configuring GTS in policy approach

To do...
1. Enter system view.
2. Create a class and enter class view.
3. Configure match criteria.
4. Return to system view
5. Create a behavior and enter behavior
view.
Command...
system-view
qos carl carl-index { precedence precedence-
value | mac mac-address | mpls-exp mpls-
exp-value | dscp dscp-list | { destination-ip-
address | source-ip-address } { subnet ip-address
mask-length | range start-ip-address to end-ip-
address } [ per-address [ shared-bandwidth ] ] }
interface interface-type interface-number
qos car { inbound | outbound } carl carl-index cir
committed-information-rate [ cbs committed-burst-
size [ ebs excess-burst-size ] ] [ green action ] [ red
action ]
Command...
system-view
interface interface-type interface-number
qos car { inbound | outbound } any cir committed-
information-rate [ cbs committed-burst-size [ ebs
excess-burst-size ] ] [ green action ] [ red action ]
Command...
system-view
traffic classifier tcl-name [ operator { and |
or } ]
if-match [ not ] match-criteria
quit
traffic behavior behavior-name
38
Remarks
—
Required.
Configure rules on
the CAR list.
—
Required.
Remarks
—
—
Required.
Remarks
—
—
—
—
—