Configuring The Advertisable Tlvs; Configuring The Management Address And Its Encoding Format - HP 5120 EI Series Lan Switching Configuration Manual

To enable LLDP polling:
Step
1. Enter system view.
2. Enter Ethernet interface
view or port group view.
3. Enable LLDP polling and
set the polling interval.

Configuring the advertisable TLVs

To configure the advertisable LLDPDU TLVs on the specified port or ports:
Step
1. Enter system view.
2. Enter Ethernet interface
view or port group view.
3. Configure the
advertisable TLVs.

Configuring the management address and its encoding format

LLDP encodes management addresses in numeric or character string format in management address
TLVs.
By default, management addresses are encoded in numeric format. If a neighbor encoded its
management address in character string format, you must configure the encoding format of the
management address as string on the connecting port to guarantee normal communication with the
neighbor.
To configure a management address to be advertised and its encoding format on a port or group of
ports:
Step
1. Enter system view.
Command
system-view
•
Enter Layer 2 Ethernet interface view:
interface interface-type interface-number
•
Enter port group view:
port-group manual port-group-name
lldp check-change-interval interval
Command
system-view
•
Enter Layer 2 Ethernet interface view:
interface interface-type interface-number
•
Enter port group view:
port-group manual port-group-name
lldp tlv-enable { basic-tlv { all | port-description
| system-capability | system-description |
system-name } | dot1-tlv { all | port-vlan-id |
protocol-vlan-id [ vlan-id ] | vlan-name
[ vlan-id ] } | dot3-tlv { all | link-aggregation |
mac-physic | max-frame-size | power } |
med-tlv { all | capability | inventory |
location-id { civic-address device-type
country-code { ca-type ca-value }&<1–10> |
elin-address tel-number } | network-policy |
power-over-ethernet } }
Command
system-view
194
Remarks
N/A
Use either command.
Disabled by default.
Remarks
N/A
Use either command.
Optional.
By default, all types of LLDP
TLVs except location
identification TLVs are
advertisable on a Layer 2
Ethernet port.
Remarks
N/A