Operating From A Remote Location - Panasonic KX-FPG381 Operating Instructions Manual

7. Answering Machine
Remote Operation

7.6 Operating from a remote location

You can call your unit from a remote location and access the answering machine.
Important:
L Program the remote operation ID beforehand (feature #11 on page 69, or page 76).
L Set the unit to TAM/FAX mode before going out (page 54).
L Use a touch tone telephone for remote operations.
Helpful hints:
L When you press a button, press firmly.
L Please make a copy of the following table, and carry it with you when you go out.
1. Call your unit.
2. During or after the greeting message,
– to access mailbox 1, enter the remote
operation ID.
– If mailbox 2 or 3 has a password, enter the
password of the mailbox you want to
access.
3. Follow the voice menu or enter the direct
commands within 10 seconds.
L To record a message, call your unit, press
{#} and the mailbox number (1, 2 or 3), then
leave a message.
Buttons Direct commands
{1} Repeats a message
Skips a message
{2}
7.6.1 Summary of remote
operation
1
Call your unit.
2
During or after the TAM/FAX greeting
message;
For mailbox 1
Press the remote operation ID.
For mailbox 2 or 3 (when you program the
password)
Enter the password.
3
Start remote operations.
When there are new recorded messages
L The unit will announce "Mailbox (no.)"
and the number of new messages in the
mailbox, and will play back the new
messages.
When there are no new messages
Voice guide:
"Mailbox (no.), no new messages."
66
Answering machine remote operation
{3}
{4}
{5}
{9}
{*}{4}
{*}{5}
{0}
{#}{1}
{#}{2}
{#}{3}
Slows down playback speed
New message playback
All message playback
Stops the operation temporarily
Erases a specific message
Erases all messages
Turns OFF the answering machine
Selecting mailbox 1
Selecting mailbox 2
Selecting mailbox 3
When voice memory is full
Voice guide:
"Memory full"
Erase unnecessary messages.
4
After 3 seconds, the voice menu will start
(page 67). Follow the menu or enter the
direct commands (page 65).
5
To end remote operation, hang up.
OR
To listen to messages in another mailbox,
press {#}{1} (mailbox 1), {#}{2} (mailbox
2) or {#}{3} (mailbox 3).
L If the unit announces "Enter mailbox
password.", mailbox 2 or 3 has a
password (feature #51 on page 71,
feature #52 on page 71, or page 76).
Enter the password.
Note:
L The unit will announce the remaining
recording time after playback, if it is less than
5 minutes.
L The messages are saved.