Panasonic KX-FPG381 Operating Instructions Manual page 16

1. Introduction and Installation
L Make sure that the ink film is wrapped
around the blue core (3) at least once.
Correct
3
Incorrect
The ink film is not wrapped
around the blue core.
6
First close the back cover securely (1) by
pushing down on the dotted area on both
sides (2). Then close the front cover
securely (3).
1
3
1.8.2 Replacing the ink film
The included film roll is a complimentary starter
ink film. To ensure that the unit operates
properly, we recommend the use of Panasonic
14
1 turn
Tight
Slack/Crease
Reverse
2
For Fax Advantage assistance, call 1-800-435-7329.
replacement film. See page 9 for accessory
information.
L We cannot be responsible for any damage to
the unit or degradation of print quality which
may occur from the use of non-Panasonic
replacement film.
1
Open the covers (see steps 1 to 3 on page
13).
2
Pull out the blue gear (1) and remove the
used ink film (2). Remove the used core
(3).
1
3
Remove the stoppers (1) and tags (2) from
the new ink film (3).
1
3
4
Insert the ink film and close the covers (see
steps 4 to 6 on page 13).
3
2
2
1