Advanced Features; Broadcast Transmission - Panasonic KX-FL501C Operating Instructions Manual

Advanced features!
How to set menu options
1. Press MENU .
SPEED DIRECTOR
2. Rotate
following is displayed.
Display:
Press and rotate
SET
SPEED DIRECTOR
feature is displayed.
3. Press .
SET
Programming table
Code Display & Feature
AUTO JOURNAL
#22
To print the journal report
automatically for fax communications.
OVERSEAS MODE
If you have difficulty sending an
overseas fax, activate this feature
before starting transmission. This
#23
feature makes sending documents
easier as the transmission speed is
slowed down.
DELAYED SEND
To send a fax automatically at a
specified time.
This allows you to take advantage
of low-cost calling hours offered by
#25
your telephone company.
The setting can be reserved to
take place up to 24 hours in
advance.
until the
ADVANCED MODE
until the desired
(The default setting is in bold type.)
Features Summary
SPEED DIRECTOR
4. Rotate
desired setting is displayed.
5. Press SET .
6. Press MENU
Note:
Step 4 may be slightly different depending on the
feature.
See page 52 for more details.
Settings
"ON": The unit will print the journal
ON
report automatically after every 30
new fax communications (p. 35).
OFF
"NEXT FAX": This setting is effective
only for the next attempted fax
NEXT FAX
transmission. After transmission, the
unit will return to the previous setting.
"ERROR": When the previous fax
ERROR
transmission fails and you redial
the same number.
This feature is not available for

broadcast transmission.

OFF
The calling charge may be higher.
To send a document:
1. Insert the document.
ON /
2. Follow steps 1–3 above.
fax no. /
3. Rotate
hh:mm
select "ON".
4. Press
5. Enter the fax number.
6. Press
7. Enter the transmission start time.
Press
OFF
8. Press
9. Press
To cancel after programming,
press
until the
.
How the unit operates
SPEED DIRECTOR
.
SET
.
SET
to select "AM" or "PM".
.
SET
.
MENU
then
STOP
SET
to
.
55