Fax Only Mode (All Calls Are Received As Faxes) - Panasonic KX-FL501C Operating Instructions Manual

FAX ONLY
(all calls are received as faxes)
Activating FAX ONLY mode
Set feature #77 to "FAX ONLY" (p. 59).
1
If the AUTO ANSWER light is off, turn it on
2
by pressing AUTO ANSWER
The display will show the number of rings
before the unit answers a call in FAX ONLY
mode.
Display:
Example:
3 If you wish to change the ring count setting,
SPEED DIRECTOR
rotate
number is displayed, and press
When receiving calls, the unit will
automatically answer all calls and only
receive fax documents.
Note:
If the AUTO ANSWER light is already on and you wish to change the ring count, turn it off once then on
again by pressing AUTO ANSWER
This mode should not be used with a telephone line which is used for both voice and fax calls. Fax
communication will be attempted even if someone is trying to call you.
If you have a telephone line just for faxes, we recommend the following setup.
Example: One telephone line is used for voice calls and a separate telephone line for faxes.
Only a fax machine is connected.
mode!
.
PICKUP & RCV FAX
AFTER 3 RINGS
until the desired
SET
and follow the instructions in step 3.
Receiving Faxes
ON
Display
SPEED DIRECTOR
.
Line 1 – Voice calls
Line 2 – Fax calls
SET
43