Storing names and telephone numbers
in SPEED
DIRECTOR!
For rapid access to frequently dialed numbers, the unit provides a SPEED DIRECTOR directory
(100 stations).
DIRECTORY PROGRAM
1
Press
Display:
SPEED DIRECTOR
2
Rotate
following is displayed.
3
Enter the name, up to 10 characters (see
page 19 for instructions).
Example:
Press
.
4
SET
5
Enter the telephone number, up to 30 digits,
using the dial keypad.
Example:
If you want to enter a hyphen, press
Press
.
6
SET
To program other items, repeat steps 3 to 6.
DIRECTORY PROGRAM
7
Press
program.
To correct a mistake
Press
or
to move the cursor to the
incorrect character/number, and make the
correction.
.
PRESS STATION
OR USE SPD-DIR
until the
NAME=
NAME=Alice
NO.=
NO.=5552233
FLASH
REGISTERED
NAME=
to exit the
Automatic Dialing
DIRECTORY PROGRAM
Display
FLASH
(Hyphen)
Helpful hint:
You can confirm the stored items on the
display (p. 26) or on the telephone number list
(p. 75).
Note:
When the following message is displayed in
.
step 6, you can store only 5 more items.
Display:
If there is no space to store new stations, the
following message is displayed in step 1.
Erase unnecessary stations (p. 25).
A hyphen or a space entered in a telephone
number counts as two digits.
To delete a character/number
Move the cursor to the character/number you
want to delete, and press
/
STOP
SET
(Delete)
SPEED DIRECTOR
SPACE= 5 DIRS.
SPD-DIR FULL
STOP
.
23