Sending A Fax Using One-Touch Dial And Speed Director - Panasonic KX-FL501C Operating Instructions Manual

Sending a fax using ONE-TOUCH DIAL and
SPEED DIRECTOR!
Before using this feature, program the desired names and telephone numbers into ONE-TOUCH
DIAL and SPEED DIRECTOR (p. 22, 23).
1 Adjust the width of the document guides to
the size of the document.
Insert the document (up to 15 pages) FACE
2
DOWN until the unit grabs the document and
a single beep is heard.
Display:
3 If necessary, press
repeatedly to select the desired setting
(p. 32).
4 Enter the fax number.
Using ONE-TOUCH DIAL 1–5:
Press the desired ONE-TOUCH DIAL key.
Using ONE-TOUCH DIAL 6–10:
LOWER
Press
ONE-TOUCH DIAL key.
SPEED DIRECTOR
Using
Display the desired name and press
FAX START
Fax auto redial
If the line is busy or if there is no answer, the unit
will automatically redial the number up to 2 times.
This feature is also available for delayed
transmission (feature #25 on page 55).
During redial, the following will be displayed.
Display:
To cancel redialing, press
STANDARD
RESOLUTION
, then press the desired
:
.
WAITING REDIAL
STOP .
Sending Faxes
Document guides
Display
LOWER
STOP
FAX START
SPEED DIRECTOR
If your unit does not send a fax
Confirm the stored telephone number on the
display and check that the number dialed is
answered by the other party's machine (p. 26).
The connecting tone will be heard during dialing
to tell you the status of the other party's machine
(feature #76 on page 58).
RESOLUTION
ONE-TOUCH DIAL
33