Broadcast transmission
This feature is useful for sending the same document to more than one party (up to 20 entries). First
program the entries, then see page 50 for transmission.
L The broadcast function utilizes station 1. The one-touch dial function will be canceled.
L The broadcast key can accept one-touch dial and navigator entries.
Programming entries into the
broadcast memory
{BROADCAST}
Station keys
{+}{-}
1
Press {MENU} repeatedly until the
following is displayed.
2
Press {BROADCAST}.
3
Press {+} or {-} until the following is
displayed.
4
Press {SET}.
L The number in brackets indicates the
number of registered entries.
{LOWER}
{SET}
{MENU}
{STOP}
DIRECTORY SET
PRESS STATION OR
b
DIRECTORY SET
PRESS NAVI.
STATION 1
DIAL MODE
[±]
STATION 1
BROADCAST
[±]
DIR=
[00]
NAVI.[+ -] & SET
Sending Faxes
5
Program entries.
Using stations 2–5:
Press the desired station key.
Example:
Using stations 6–10:
Press {LOWER}, then press the desired
station key.
Using navigator directory:
Press {+} or {-} until the desired entry is
displayed and press {SET}.
6
Press {SET} after programming all of the
desired entries.
7
Press {STOP} to exit the program.
Note:
L If you program the wrong entry, press
{STOP} after step 5 to erase the entry.
L Confirm the stored entries by printing a
broadcast programming list (page 79).
DIR=ANN
[01]
STORE:PRESS SET
REGISTERED
u
DIRECTORY SET
PRESS STATION OR
b
DIRECTORY SET
PRESS NAVI.
47