Setting Your Logo - Panasonic KX-FHD332 Operating Instructions Manual

Setting your logo

The logo can be your company, division or name.
{FLASH} {<}{>}{+}{-}
{MUTE}
(Hyphen) (Insert)
1
Press {MENU}.
2
Press {<} or {>} until the following is
displayed.
3
Press {SET}.
4
Enter your logo, up to 30 characters, using
the dial keypad. See page 32 for details.
Example: "BILL"
1. Press {2} 2 times.
L Cursor (|) will appear on the display.
2. Press {4} 3 times.
3. Press {5} 3 times.
4. Press {>} to move the cursor to the
next space and press {5} 3 times.
{MENU}
{SET}
{STOP}
(Delete)
SYSTEM SET UP
PRESS NAVI.[( )]
YOUR LOGO
PRESS SET
LOGO=
LOGO=| B
LOGO=B| I
LOGO=BI| L
LOGO=BIL| L
For Fax Advantage assistance, call 1-800-435-7329.
Initial Programming
5
Press {SET}.
L The next feature will be displayed.
6
Press {MENU}.
Note:
L You can enter your logo by pressing {+} or
{-} in step 4. In this case, press {>} to
move the cursor (see page 32 for details).
To change capital or lower-case letters
Pressing the {#} key will change to capital or
lower-case alternately.
1. Press {2} 2 times.
2. Press {4} 3 times.
3. Press {#}.
4. Press {5} 3 times.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect character, and make the correction.
To delete a character
Press {<} or {>} to move the cursor to the
character you want to delete and press {STOP}.
To insert a character
1. Press {<} or {>} to move the cursor to the
position to the right of where you want to
insert the character.
2. Press {MUTE} to insert a space and enter
the character.
LOGO=| B
LOGO=B| I
LOGO=B| i
LOGO=Bi| l
31