Panasonic KX-FHD332 Operating Instructions Manual page 27

How to set up
{RECEIVE MODE}
{+}{-}
1
Set the fax machine to FAX ONLY mode by
pressing {RECEIVE MODE} until the
following is displayed.
FAX ONLY MODE
3 RINGS
L The display will show the number of
rings before the fax machine answers a
call in FAX ONLY mode.
L You can change the ring count setting
by pressing {+} or {-}.
Press {SET} to complete the ring count
setting.
2
Confirm the automatic answer feature on
the computer is set to "OFF".
{SET}
FAX
TEL
For Fax Advantage assistance, call 1-800-435-7329.
Connections and Setup
How to receive calls
When receiving calls, the fax machine will
automatically answer all calls and only receive
fax documents.
Note:
L If you use your computer as an answering
machine, please refer to "Case 1: Receives
faxes and phone calls (on answering
machine) on a single line (one phone
number)".
L When the fax machine is using the telephone
line (ex. during phone calls, fax
sending/receiving), telephone line is busy
and MODEM cannot be used.
L When the PC is using the telephone line, the
following will be displayed:
Do not use the fax machine while the
message is displayed, or else the PC
activities could be disturbed.
EXT. IN USE
27