Panasonic KX-FHD332 Operating Instructions Manual page 17

How to set up
{RECEIVE MODE}
{+}{-}
1
Set the fax machine to FAX ONLY mode by
pressing {RECEIVE MODE} until the
following is displayed.
FAX ONLY MODE
3 RINGS
L The display will show the number of
rings before the fax machine answers a
call in FAX ONLY mode.
2
Press {+} or {-} to change the ring
setting to 5 and press {SET}.
3
Turn on your answering machine.
4
Adjust a ring setting of the answering
machine less than 4.
L This will allow the answering machine to
answer the call first.
{SET}
{FAX/START}
FAX
TEL
For Fax Advantage assistance, call 1-800-435-7329.
Connections and Setup
How to receive calls
At first your answering machine will pick up the
call.
L If the call is a phone call, the answering
machine will record voice message
automatically.
L If a fax calling tone is detected, the answering
machine will be disconnected and the call will
be switched to the fax machine. The fax
machine will receive a fax automatically.
If the answering machine is turned off
The fax machine will ring 5 times and receive a
fax automatically.
With the fax machine
1. When the fax machine rings, lift the handset
of the fax machine.
2. When document reception is required, a fax
calling tone (slow beep) is heard, or no sound
is heard, press {FAX/START}.
3. Replace the handset.
L The fax machine will start reception.
With an extension telephone
1. When the extension telephone rings, lift the
handset of the extension telephone.
2. When document reception is required, a fax
calling tone (slow beep) is heard, or no sound
is heard, press {*}{#}{9} (pre-selected fax
activation code) firmly.
3. Replace the handset.
L The fax machine will start reception.
Note:
L You can change the fax activation code in
feature #41 (page 62).
17