Selecting The Color Mode - Panasonic DP-C213I Operating Instructions Manual

Selecting the Color Mode

You can either copy in the machine selected color mode, or you can manually change it.
Full color
The default color mode settings can be changed. Refer to Copier Settings (For Key Operator) in the
Operating Instructions (For Function Parameters) on the provided CD-ROM.
Manually selected color mode settings will return to the default settings under the following conditions.
- If the Reset key is pressed.
- If Auto Reset Time interval has lapsed (default = 1 min).
- If the power is turned OFF.
1
Place original(s).
Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Copy key if the machine is
set to other function mode.
3
Select "Quality Adj.".
8
Full Color
Monochrome
2 Color
1 Color
Ex: Full Color
4
5
6
Monochrome
Select the desired Color Mode, and
then select "OK".
• Auto:
The color original is copied in Full
Color, and the monochrome
original is copied in Black & White
by automatically detecting the
original's color.
• Black (Monochrome) (see page 9)
• Full Color (see page 9)
• 2 Color (see page 10)
• 1 Color (see page 12)
Enter the desired number of copies.
Press the Start key.
After finishing copying, press the Reset key
to return to the initial screen of the current
active mode.
Monochrome
1 Color