Advertisement
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Do not use tools in damp or wet locations. Don't
expose to rain. Keep work area well lit.
3.
Keep children away. Children must never be allowed in the work area. Do not let
them handle the Caliper.
4.
Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5.
Use the right tool for the job. Do not attempt to force a small tool or attachment to
do the work of a larger industrial tool. There are certain applications for which this tool
was designed. It will do the job better and more safely at the rate for which it was
intended. Do not modify this tool and do not use this tool for a purpose for which it
was not intended.
6.
Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically nonconductive clothes and nonskid footwear are
recommended when working. Wear restrictive hair covering to contain long hair.
7.
Use eye protection. Always wear ANSI approved impact safety goggles.
8.
Do not overreach. Keep proper footing and balance at all times.
SKU 93028
For technical questions, please call 1-800-444-3353.
Specifications
Digital Readout Range
Graduations
Jaw Reach
Scale Length
Accuracy
Overall Dimensions
Maximum Temperature
Battery
Save This Manual
Safety Warnings and Precautions
0" to 5.7" (0 to 144.8 mm)
.0005"
3-5/8"
6"
.001"
9-1/2" L x 4-7/8" W x 1/2" T
105
o
F
1.5 Volt (SS44)
Page 2
Advertisement
