Log Settings; Configuring The Persistent Log - Cisco WAP571 Administration Manual

Administration

Log Settings

STEP 3
STEP 4
Log Settings
!
CAUTION
STEP 1
STEP 2
Cisco WAP571/E Administration Guide
Select Adjust Time for Daylight Savings if daylight savings time is applicable to
your time zone. When selected, configure these fields:
• Daylight Savings Start—Select the week, day, month, and time when
daylight savings time starts.
• Daylight Savings End—Select the week, day, month, and time when
daylight savings time ends.
• Daylight Savings Offset—Specify the number of minutes to move the clock
forward when daylight savings time begins and backward when it ends.
Click Save. The changes are saved to the Startup Configuration.
You can use the Log Settings page to enable log messages to be saved in
permanent memory. You can also send logs to a remote host.

Configuring the Persistent Log

If the system unexpectedly reboots, log messages can be useful to diagnose the
cause. However, log messages are erased when the system reboots unless you
enable persistent logging.
Enabling persistent logging can decrease the flash (nonvolatile) memory and
degrade network performance. Only enable persistent logging to debug a
problem. Make sure that you disable persistent logging after you finish debugging
the problem.
To configure persistent logging:
Select Administration > Log Settings in the navigation pane.
Configure the parameters:
3
38