Demonstration Display - Furuno GP-1640 Operator's Manual

4. Use the cursor pad to select item, and then
press the EDIT soft key. For example,
select PLOT. The plot window appears.
PLOT
TIME
DISTANCE
Plot window
5. Use the cursor pad to select option, and
then press the ENTER soft key.
6. Press the [MENU] key to finish.
1.7

Demonstration Display

The demonstration display provides simulated
operation of this unit. On the plotter display,
own ship tracks, at the speed selected, a figure
eight course or any course you enter, starting
from position entered. All controls are
operative; you may set destination, enter
waypoints, etc.
1. Press the [MENU] key, followed by the
CONFIGURATION and SYSTEM MENU
soft keys to open the system menu.
2. Press the DEMONSTRATION MODE key
to open the DEMO MODE menu.
OFF
DEMO MODE
00.0kt
DEMO SPEED
000.0
DEMO COURSE
34 44.000'N
DEMO START LAT
135 21.000'E
DEMO START LON
GPS 3D
Demo setting screen
3. Press ▲ or ▼ to select DEMO MODE.
4. Press the EDIT soft key to show the demo
mode window.
5. Press ▲ to select ON.
6. Press the ENTER soft key or the [ENTER]
key.
7. Select DEMO SPEED and press the EDIT
8. Press the ENTER soft key or the [ENTER]
9. Select DEMO COURSE and press the
10. Press the ENTER soft key or the [ENTER]
11. Select DEMO START LAT., and press the
12. Press the ENTER soft key or the [ENTER]
key.
13. Select DEMO START LONG., and press
DEMO
14. Press the ENTER soft key or the [ENTER]
MODE
key.
EDIT
15. Press the [MENU] key.
16. Press the [PLOT] key to finish.
To cancel the demonstration display, set
DEMO MODE to OFF.
RETURN
DEMO MODE
ON
OFF
Demo mode window
soft key. Enter speed. Select digit with
◄/►and enter value with numeric key.
key.
EDIT soft key. Select how you want the
courseline to be traced; by FIGURE 8 or
DIR.(direction). For DIR., enter course.
key.
EDIT soft key. Enter any latitude.
the soft key EDIT. Enter any longitude.
1-5