Table of Contents
Advertisement
Quick start
1
Install the washing
machine
2
Load the laundry
3
Measure out the
detergent
4
Close the top lid
5
Put down (hang up)
the drain pipe
Main Functions:
Preparation:
1.Put down the drain pipe;
2.Connect the inlet pipe,turn on the tap;
3.Put the plug of the power strip into the socket;
4.Take out the coins and other things from the pocket,shake off the sediment of the clothes.
Detailed Steps:
1.Press [ON/OFF] button;
2.Select the water level according to the washing load;
3.Press [Start/Pause] button.
9
Press the
[start/pause] key
8
Select the desired
program
7
Plug the power supply
6 Turn on water supply
11
11
The main wash
Program Selection:
1. Press [ON/OFF] button;
2. Select the water level and program;
3. Press [Start/Pause] button.
When washing process finished:
1. The buzzer will buzz continuously for 6 times and then the power will be automatically cut
off;
2. Turn off the water tap.
3. Although the power can be cut off automatically, the power plug must be pull out as well
for the safety.
Alarm function when door opened:
1. When washing or spinning,there will be E3 alarm while consumer open the lid,and if
consumer close the lid,the alarm will be released,and to continue to run the previous
program which before consumer open the lid.
2. When "Delay" starts,there will be "Delay" E3 alarm while consumer open the lid,and if
consumer close the lid,the alarm will be released,and to continue the "Delay"function.
But while the machine is running,if consumer open the lid,there will be no alarm.
Clothes Washing Skills:
1. While washing the clothes which are easily damaged,consumer can put those clothes
into the mesh bag,and then take the washing process;
2. For the big size or easily floated clothes,should be put into the tub first;
3. For the easily pilling clothes,consumer should turn inside out the reverse side clothes,
and then take the washing process;
4. While washing the clothes which have strap or zipper,consumer should tie the strap and
zip the zipper well.
5. Remove the sediment before washing;
6. For the especially dirty parts,consumer can scrub with detergent first.
！
NOTICE
! .Close the top lid when machine is running
automatically pause for working and send out abnormal warning.
! .The washer will not work when the filled water does not reach the set water level.
during spin process
, otherwise, it will
12
12
Advertisement
Table of Contents
