Special Features - Beko WTAU13AW User Manual

Special features

Delay:
Delay time program
Delay time means the preset beginning
time of washing.
1. Switch on the power .
2. Open the tap and lay the drain hose.
3. Put in the laundry and detergent.
4. Select the propre water level according
to the quantity of clothes.
5. Select the functions and programs.
6. Press "DELAY" button to select the
beginning time of washing.
7. Close the lid and press "START/PAUSE"
button
Confirmation of the delay and inspection
1. After the delay function is started, digital tube will display the flashing of delay time, and
other lights are turned off.
2. After the delay function is started , press " Delay" button continuously , you may inspect
the preset program and function . Loose the button , the program return to delay status.
Cancel the delay time, or alternate the delay time
1. Press "Power" button to cancel the delay time.
2. To change the delay time , cancel the delay time first, and then press "Delay" button to reset.
Instruction to single wash procedure
1. User may freely select any single procedure, or any combination of procedures
RINSE and SPIN according to the actual requirements. It is only required to turn off any one
or two of these three indicators that not needed by the user. And keep the indicator be on
showing the process needed by the user.
2. Single wash -- after switching on the power, turn off RINSE and SPIN two indicators by pressing
function button. The operation for single rinse and single spin is similar.
3. Single wash-spin – after switching on the power, turn off RINSE indicator by pressing function
button. The operation for single rinse-spin and single wash-rinse is similar.
Child Lock
:
1. This function is effective only after program starts;
2. Press [Start/Pause]button to start the program, then press [Rinse] & [Wash] button at
time to start the child lock function. If consumer wants to close this function, they
[Rinse]&[Wash]button at the same time.
3. When "child lock"started,if open the lid during the running process, there will be an alarm.
Open the lid within 20s,there will be a "E3"alarm,if close the lid within 20s,the alarm will be
released, and continue to run the previous program which before opening the lid. If the lid
opened after 20s,the display will show"CL" alarm named "normal failure alarm",the drain
valve will be opened. after the water drained lasting for 90s,the drain valve will be closed.
During this process, the alarm still can not be released. The normal alarm will be happened
every 15 mins, consumer can power off the machine or unplug to release this alarm.
Press the "DELAY" button each time, the
number on the digital indication adds by
"1";After the number reaches "24",press
the "DELAY"button each time,the number
adds by"6";After the number reaches 48,
the light of delay time is turned off, and
the delay program return to original status.
Delay(H)
Remain(M)
among WASH,
can re-press
13
Special features
Fuzzy weighting function:
1. Press ON/OFF button " "
2. Turn on the tap, put down the drain pipe.
3. Put in the washing load and detergent(Do not sprinkle the detergent on the clothes directly,
to avoid the clothes' color fading),close the lid.
4. Select "Normal"、"
Soft
level automatically according to the load weight.
5. Press [Start/Pause] button to run fuzzy weighting function.
Notice:
1. When there's water in the tub, this function is not available.
2. This function can be only applied under the programs of "Normal"、"
3. Before press [Start/Pause] button, if consumer selected the water level, there will be no
fuzzy weighting function.
4. After press [Start/Pause] button, the washing machine will run the fuzzy weighting function.
Consumer can also select the water level to set the water level as needed.
Self Power off function:
1. If the machine do not start to work within 10 minutes after powered on, it will power off
automatically.
2. After end of operation and the buzzer sounding 6 times, it will power off automatically.
Unbalance Control:
1. During the spin process, and under the condition of safety switch connected, if the sudden
break happened, the washing machine will come into the unbalance adjustment situation;
2. While coming into the unbalance adjustment process, the rinsing LED flashed, inlet the
water to reach to the set level, adjust the clothes' status, drain after finished rinsing, and
return to the normal spinning process. If it is not effective after 3 times' adjustment, there
will be an alarm.
Power failure memory function
If the power supply becomes off suddenly during operation , the machine remembers
the current operation state . When power is on ,the machine returns to former operation
state automatically.
One Touch System
After power on, push
"
if other buttons, such as water level, program, temperature and function are pressed before. It will also
be invalid if there is water left in the inner tube, and the program will be directly set into
same
Normal with default water level 6.
Washing Machine will perform fuzzy detection immediately by pushing
and water level and program will be selected according to amount of clothing. During the selecting,
water level lamp is flashing continuously, as digital display shows
button is effective. After detecting is completed, program is chosen to
water level 1/2/3,and
run automatically when checked out and finished program and water level setting.
.
"、" " program. The washing machine will select the water
Strong
start/pause"button directly to One-key Washing. The function will be canceled
"--",
Normal"with water level 4/5/6,also, "Soak" with water level 7/8.
"
14
"、" ".
Soft Strong
start/pause after power on
" "
at the same time, only power
Quick" with automatically setting
"
Program will