Speed Selection; Rinse Hold; Delayed Start - Beko WCC 7711 BC User Manual

Table of Contents

Advertisement

4.3.8 Speed selection

Whenever a new programme is selected, the recommended spin speed of the selected
programme is displayed on the spin speed indicator.
To decrease the spin speed, press the Spin Speed Adjustment button. Spin speed
decreases gradually. Then, depending on the model of the product, "Rinse Hold" and "No
Spin" options appear on the display. When "No Spin" is selected, the rinse level indicator
lights will not turn on.

Rinse hold

If you are not going to unload your clothes immediately after the programme completes,
you can use rinse hold function to keep your laundry in the final rinsing water in order to
prevent them from getting wrinkled when there is no water in the machine. Press Start
/ Pause button after this process if you want to drain the water without spinning your
laundry. Programme will resume and complete after draining the water.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start /
Pause button.
The programme will resume. Water is drained, laundry is spun and the programme is
completed.
C
If the programme has not reached the spinning step, you can change the speed without
switching the machine to Pause mode.

4.3.9 Delayed Start

With the Delayed Start function the startup of the programme may be delayed up to 3, 6
or 9 hours.
C
Do not use liquid detergents when you set Delayed Start! There is the risk of staining of the
clothes.
1. Open the loading door, place the laundry and put detergent, etc.
2. Select a washing programme and spin speed.
3. Set the desired time by pressing the Delayed Start button. When the button is
pressed once, 3 hours delayed start is selected. When the same button is pressed
again, 6 hours delay is selected, and when it is pressed for the third time, 9 hours
delayed start is selected. If you press the Delayed Start button once again, Delayed
Start function will be cancelled.
4. Press Start / Pause button. Previous delayed start time light turns off and next
delayed start time light turns on after every 3 hours.
5. At the end of the countdown, all delayed start lights will turn off and the selected
programme will start.
C
You can switch the machine to pause mode and add laundry during the delayed start period.
18 / EN
Washing Machine / User's Manual

Advertisement

Table of Contents
loading

Table of Contents