Table of Contents
Advertisement
Malfunction display and solutions
Malfunction display and solutions
When the washer is in trouble, please contact local service office or the sales service
department of our company and the customer should not dismantle the machine.
If the washer can not work normally, and the abnormal indication is shown in the digital
display window or the machine alarms, please check and correct them as follows.
Falut
Cause of fault
Water injection for about
Alarm for
1 hour, but do not reach
water inlet
preset water level.
Drain off water 10 mins not
Drain Alarm
arrive at empty water level.
While spinning or delay
function starts, there will
be an alarm if open the lid,
Alarm for
and only to be suspended
opening lid
without alarming in the
spinning process.
Imbalance
Checked imbalance for
Alarm
the third time.
Note:The program which has E4 alarm when shocked in the first time is "Air dry" and Tub clean".
Alarm of the
Stopping alarm
Indication
buzzing sound
The buzzer goes
Open the lid to
"E1"flares
on buzzing for 10
deal with faults,
seconds. If the
then close the
fault is not solved,
lid to stop the
buzzes again for
alarm.
"E2"flares
10 seconds in
every 15minutes.
"E3"flares
"E4"flares
"
19
Technical specifications
Technical specifications
Rated washing capacity
Rated voltage
Rated frequency
Rated input power
Motor rated input power
Pump rated input power
Grade of waterproof
Water pressure
Standard program water consumption
Water volume
Net weight
Overall dimensions
13.0kg
220V~
50Hz
600W
600W
45W
IPX4
0.1MPa~0.6MPa
220L
85L
46kg
601X630X1000(mm)
MADE IN CHINA
20
Advertisement
Table of Contents
