Table of Contents
Advertisement
Instruction of the washer operation panel
6.Delay:
Long press "Delay"button,every 1s will increase 1 hour , and also have
a beep once, when after reach to 24 hours, it will return to the initial state.
After "delay"starts(do not press "child lock"button),consumer can review
the set programs when press "delay" button again. When "delay"starts, there
will be an"delay alarm"if consumer open the lid, and if consumer close the lid,
this alarm will be released. But while the machine is running, if consumer
open the lid , there will be "E3"alarm. Detailed usage, consumer can refer to
the description of "special function-delay function".
5.Child Lock
Press [Start/Pause]button to start the
program, then press [Wash] &
[Rinse] button at same time to start
the child lock function, it can lock the
selected program to avoid any
unnecessary troubles while children
made the faulty operation. If
consumer wants to close this function,
they can re-press [Rinse]&[Wash]
button at the same time.
4.Function
After start, one light will flash
among the function of wash,
rinse and spin according to real
process.
If the drawing is changed, no information anymore.
！
To protect the control panel, the interval time of power on and off should be not less than 30 seconds.
7.Program Selection:
Before starting, continuously press this
button to select the corresponding program:
[Normal], [Soft], [Soak], [Strong]
[Quick],[Memory], [Air dry], [Tub Clean].
7
8
5
6
3
4
1
2
Water
Before washing,consumer can select the water level
according to the dirty degree,material or weight of
clothes.The detailed usage,consumer can refer to
"The relationship between the water level and load.
9
9
8.
FCS(Fast Clean System)
Start up Fast Clean Stystem: Power on,
select "Normal","Soft","Soak","Strong"
program,then press FCS button. then press
"Start/Pause" button, FCS function starts up.
The relative figures will be showed after FCS
function starts up.
Cancellation of FCS function: when the FCS
function was selected, The function can be
cancelled by pressing any button except
"Temperature","Water level","Delay",or
power off.
3.WaterLevel Selection:
FCS function
[ON/OFF] button has function of
ON/OFF
open or close the power supply.
[Start / Pause] button has both
function of startand pause.
Continuously press this button, the
machine will be switched between
start and pause mode.
10
10
9.Temperature:
Press the button to select different
temperature water for wash.
1.Power Supply:
2.Start / Pause
Advertisement
Table of Contents
