Table of Contents
Advertisement
Preparation before washing
Adjust the adjustable foot to make
1
the washer be placed stable.
Adjustable foot (extend when
clockwise rotating and shorten
when counterclockwise rotating)
(Slightly incline the washer first and loosen the
adjustable foot knob. Adjust the adjustable foot so
as to ensure four corners of washer be steadily
contacted with the ground.
Then tighten the
adjustable foot knob and lock it. If the ground is
obviously not flat, correction should be made on
the ground surface, otherwise the washer barrel
will incline and knock the cabinet)
Put down the drain
Connect with to
3
5
hose.
power source.
Note:
Before washing machine starts, user should fix
drain pump at the outlet place about 86-100cm
high to hang the pipe.
Turn on the
4
water supply.
Before washing, please do take out coins,
NOTICE
keys and other hard goods, and zip up clothes
！
tightly to prevent them
and barrel from damage.
Install the water
2
inlet hose.
Cold
Hot
(blue)
(red)
Put in
6
clothes
and
suitable
amount of
washing
powder.
7
Parts identification of the washer
Name Of Parts
Top lid
Water inlet valve
Filter support
Control panel
Impeller
Cabinet
Accessories
Water inlet hose assembly
Please refer to the real material as the attachment
Washing powder area
Detergent area
Power line
Handle
Upper drain hose
Adjustable foot knob
Self-tapping screw
Base cover
8
Advertisement
Table of Contents
