Table of Contents
Advertisement
Safety and precautions
Please ensure that the water inlet pipe
is connected and the tap is opened
before washing
clothes.
!
Do not replace power cord
by yourself.
Prohibited
Please do not pull the electric cord
when pulling out the
plug.
!
Warning
Please do not wash down jacket,
raincoat, fishing coat and similar
clothes in the
washer.
Prohibited
It is strictly prohibited to place
children or lay
weights on the
washer.
小天鹅
Prohibited
Do not fill the tub with water manually.
鹅
天
小
Prohibited
5 5
Installation of the washer
Installation of the washer
Remove package
Remove package and take out the bottom board of
the cabinet on the foam cover.
Open the lid of washer's door and take out accessories.
A trial operation or washing on the foamed cushion
is strictly forbidden.
Placement of upper water drain hose
The height of drain hose ("a")should between 86-100 cm.
Diameter of "b"shuld not less than 3 cm, and flow capacity
not less than 40 L/Min.
Before washing machine starts, user should hang up the
drain pipe 86-100cm height from the floor.
Installation of water inlet pipe
Put the water inlet pipe(which has
metallic filtering bag) screw on to the tap.
Tightly screw another end of water
inlet hose on water inlet valve .
(with rubber seal ring inside).
Note: When tightening the
clamping nut, evenly apply the
force and do not twist the water
inlet valve to avoid breaking of
water inlet valve joint.
Base foamed cushion
86~100 cm
Clamping nut
Water inlet hose
6 6 6 6
Advertisement
Table of Contents
