Automatically Correct The Brightness And Tint For Multiple Projectors; Color Matching - Epson EB-L1505U User Manual

Multi-Projection Function
a
• Auto adjustment is not available when using the following lenses.
- EB-L1505U/EB-L1500U: ELPLR04, ELPLL08, ELPLL07
- EB-L1405U/EB-L1300U/EB-L1200U/EB-L1100U: ELPLX01,
ELPLR04, ELPLM11, ELPLM07, ELPLL08, ELPLL07
• After auto adjustment, the movement range for lens shift is reduced
for some lenses.
s "Adjusting the Position of the Projected Image (Lens Shift)"
p.33
Automatically correct the brightness and tint for multiple
projectors
Automatically correct the brightness and tint for the projectors selected in
Projector Grouping based on the brightness and tint on the master
projector.
a
• Check the following before starting auto adjustment.
- The projector is connected to the network
- The Location Setup for the projector has already been set
• Auto adjustment is performed using the camera built into the front
of the projector. Do not block the camera or the projected images.
• The time necessary for auto adjustment varies according to the
location and number of projectors and can take up to approximately
seven minutes.
• Settings are auto adjusted for Brightness Settings and Black Level
(Color Adjustment only).
• After making automatic adjustments, Color Uniformity and Color
Matching are returned to their defaults.
a
Select Screen Matching from Multi-Projection, and then press
the [ ] button.
b
Select Start Auto Adjustment, and then press the [
The adjustment pattern is displayed, and adjustment starts. If the
projected image is displayed before the adjusting, the procedure is
complete.
a
• See the following if an error occurs.
s "Automatic adjustments are not performed correctly"
• To return to the status before auto adjustment, select Undo. When
you select Redo after selecting Undo, it returns the image to the
status after auto adjustment.
• To return Screen Matching to its default value, select Reset.

Color Matching

You can fine tune the color balance and brightness from black to white for
each color tone.
When the projectors are not connected to a network, or if you want to
adjust manually after the automatic adjustments, perform the following
steps on all projectors.
100
] button.
p.176