Notifications Menu - Epson EB-L1505U User Manual

List of Functions
Submenu
IP Address Dis To prevent the IP address from being displayed on the LAN
play Standby screen, set this to Off.

Notifications menu

When this is set, you receive an email notification if a problem or warning
occurs in the projector.
"Reading error notification mail"
s
Submenu
Mail Notification Set to On to send an email to the preset addresses when a problem
or warning occurs with a projector.
You can input the IP Address
SMTP Server
projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from
0 to 255)
Function
p.199
Function
g
for the SMTP server for the
Submenu
Port Number You can input the port number for the SMTP server. The default
value is 25. You can input numbers between 1 to 65535.
Enter the email address of the sender.
From
Set the destination email addresses for the notification email, and
Address 1 Set
the notification content. You can register up to three
ting/Address 2
destinations. You can enter up to 32 single-byte alphanumeric
Setting/Address
3 Setting characters for the email addresses.( " ( ) , : ; < > [ \ ] and spaces
cannot be used.)
Set to On to monitor the projector using SNMP
SNMP
the projector, you need to install the SNMP manager program on
your computer. SNMP should be managed by a network
administrator. The default value is Off.
Trap IP Address You can register up to two IP addresses for the SNMP trap
1/Trap IP Ad notification destination.
dress 2
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from
0 to 255)
Community Set the community name of SNMP. You can enter up to 32 single-
Name byte alphanumeric characters. (Spaces and symbols other than @
cannot be used.)
143
Function
g
. To monitor