Others Menu; Reset Menu - Epson EB-L1505U User Manual

List of Functions

Others menu

Submenu
For the priority gateway, select either Wired or Wireless.
Priority Gate
way
AMX Device Dis When you want to allow the projector to be detected by
covery AMX Device Discovery
you are not connected to an environment controlled by a
controller from AMX or AMX Device Discovery.
Set this to On only when monitoring or controlling the
Crestron Room
projector over the network using Crestron RoomView
View
Otherwise, set this to Off.
s "About Crestron RoomView
Changes in projector settings take effect upon restarting.
When this is set to On, the following functions are not
available.
• Epson Web Control
• Message Broadcasting (EasyMP Monitor plugin)
Control4 SDDP Set to On if you want to enable the acquisition of the
device information by Control4
Protocol (SDDP)
Function
g
, set this to On. Set this to Off if
®
" p.202
®
Simple Device Discovery
g
.
Submenu
Art-Net *
Message Broad
casting
* EB-L1505U/EB-L1500U/EB-L1405U only

Reset menu

Resets all of the network settings.
®
.
Function
Art-Net: Set this to On to control the projector using Art-
Net.
s "About Art-Net (EB-L1505U/EB-L1500U/EB-L1405U
only)" p.206
Net/Sub-Net/Universe: Sets the projector's Net/Sub-Net/
Universe.
Start Channel: Sets the start channel that handles Art-
Net.
s "Channel definitions" p.206
You can switch the Message Broadcasting function to enable
or disable.
You can download Message Broadcasting and its Operation
Guide from the following Web site.
http://www.epson.com
144