Network Menu - Others Menu - Epson EB-U42 User Manual

Projector Network Settings - Network Menu
Setting Options
Mail Notification On
Off
SMTP Server IP address
Port Number 1 to 65535 (default
is 25)
From Up to 32
alphanumeric
Address 1 Setting
characters
Address 2 Setting
Up to 64
Address 3 Setting
alphanumeric
characters from the
Web browser
(do not use " ( ) , : ;
< > [ \] spaces)
SNMP On
Off
Trap IP Address 1 IP address
Trap IP Address 2
Description
Set to On to send an email to the preset
addresses when a problem or warning
occurs with a projector.
Enter the IP address for the projector's
SMTP server using 0 to 255 for each
address field.
Do not use these addresses: 127.x.x.x,
192.0.2.x or 224.0.0.0 through
255.255.255.255 (where x is a number
from 0 to 255).
Select a number for the SMTP server
Port Number.
Enter the email address of the sender.
Enter the e-mail address, and select the
alerts you want to receive. Repeat for up
to 3 addresses.
Set to On to monitor the projector using
SNMP. To monitor the projector, you
need to install the SNMP manager
program on your computer. SNMP
should be managed by a network
administrator.
The default value is Off.
Enter up to two IP addresses to receive
SNMP notifications, using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Setting Options
Community Name Up to 32
alphanumeric
characters
(do not use spaces
and any symbols
other than @)

Network Menu - Others Menu

Settings on the Others menu let you select other network settings.
Network > Network Configuration > Others
s
Setting Options
Message On
Broadcasting
Off
113
Description
Set the SNMP community name.
Description
Set to On to enable the Message
Broadcasting feature. See the Epson
Projector Management Operation Guide
for details.