Others Menu; Reset Menu - Epson EB-L1105U User Manual

List of Functions

Others menu

Submenu
For the priority gateway, select either Wired or Wireless.
Priority Gate-
way
AMX Device Dis- When you want to allow the projector to be detected by
covery AMX Device Discovery
you are not connected to an environment controlled by a
controller from AMX or AMX Device Discovery.
Set this to On only when monitoring or controlling the
Crestron Room-
projector over the network using Crestron RoomView
View
Otherwise, set this to Off.
s "About Crestron RoomView
Changes in projector settings take effect upon restarting.
When this is set to On, the following functions are not
available.
• Epson Web Control
• Message Broadcasting (EasyMP Monitor plugin)
Control4 SDDP Set to On if you want to enable the acquisition of the
device information by Control4
Protocol (SDDP)
Function
g
, set this to On. Set this to Off if
®
" p.202
®
Simple Device Discovery
g
.
Submenu
Art-Net *
Message Broad-
casting
* EB-L1505U/EB-L1500U/EB-L1405U only

Reset menu

Resets all of the network settings.
®
.
Function
Art-Net: Set this to On to control the projector using Art-
Net.
s "About Art-Net (EB-L1505U/EB-L1500U/EB-L1405U
only)" p.206
Net/Sub-Net/Universe: Sets the projector's Net/Sub-Net/
Universe.
Start Channel: Sets the start channel that handles Art-
Net.
s "Channel definitions" p.206
You can switch the Message Broadcasting function to enable
or disable.
You can download Message Broadcasting and its Operation
Guide from the following Web site.
http://www.epson.com
144