Timed Reminder - Panasonic KX-TDA100 Feature Manual

1.17 T
– The Music on Hold heard by a caller while waiting in a queue.
– The Time Table used by the ICD group to determine the current time mode. An overflow
destination and Queuing Time Table can be assigned for each time mode.
Programming References
PC Programming Manual
2.8.3 [2-2] Operator & BGM
→ PBX Operator—Day, Lunch, Break, Night
→ BGM and Music on Hold—Music on Hold
2.8.5 [2-4] Week Table
2.8.7 [2-5] Holiday Table
2.8.12 [2-7-2] Class of Service—External Call Block
2.8.13 [2-7-3] Class of Service—Internal Call Block
2.9.3 [3-2] Extension Group
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Main—Tenant Number
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Extension Group
2.10.10 [4-2-1] Portable Station—Extension Settings—Main—Extension Group
2.11.1 [5-1] Doorphone—Tenant Number
2.11.7 [5-5] External Sensor—Tenant No.
2.12.1 [6-1] System Speed Dial
2.12.6 [6-6] Tenant
2.14 [8] ARS
2.14.6 [8-5] Carrier—Authorization Code for Tenant
2.16.2 [10-2] DIL Table & Port Settings—DIL—Tenant Number
2.16.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)—Tenant Number
PT Programming Manual
[001] System Speed Dialing Number
[006] Operator Assignment
[320] ARS Mode
[711] Music on Hold
Feature Manual References
2.1 Capacity of System Resources

1.17.4 Timed Reminder

Description
An extension can be preset to ring at a certain time, to act as a wake-up call or reminder. This feature can
be programmed to activate only once, or daily. If the user answers the alarm call, a prerecorded voice
message will be heard. If a message is not assigned, a special dial tone (dial tone 3) will be heard.
Timed reminders can be set in one of two ways:
• By the extension user, from his or her own extension (Timed Reminder).
• Remotely, by the hotel operator (Remote Wake-up Call).
300 Feature Manual