Table of Contents
Advertisement
Fault
The temperature
in the cool fresh"
compartment is
too cold or too
warm.
Customer service
Please check your telephone book or the
customer service list for your nearest
customer service facility. When
contacting customer service, please
ALWAYS quote the product number
(E number) and production number
(FD number) of your appliance.
Downloaded from Fridge-Manual.com Manuals
Possible cause
The fixed setting has been set too
high or too low (e.g. if there is frost
in the cool fresh" compartment).
Remedial action
The temperature in the cool fresh
compartment can be changed to be
2 steps warmer and/or colder. If the
bargraph is set to 5, the cool fresh
compartment has a temperature of
almost 0 °C.
The numbers on the bargraph do
not correspond to the cool fresh
compartment temperatures.
Step 3 - coldest setting
Step 8 - warmest setting
Press button Fig. 2/6 for 3 seconds
until a beeping signal sounds, the
display 8 flickers.
Change the setting with button 7.
After one minute, the set temperature
is stored.
These numbers can be found on the
rating plate. Fig. z
To prevent unnecessary call outs, please
assist customer service by quoting the
product and production numbers. This
will save you additional costs.
en
35
Advertisement
Table of Contents
