Initial Camera Setup - Vivitar VIV-CV-1632 User Manual

Initial Camera Setup

CHARGING THE BATTERY
1) Power off the camera.
2) Move the USB/Memory Card cover to reveal the USB port and Micro SD Card slot.
3) Using the supplied USB cable, connect the smaller end of the cable to your camera and the
other end of the USB cable to your computer's USB port.
NOTE: 'MSDC Mode' and 'Record Mode' appear on the LCD screen once the camera is
connected to your computer. The camera recharges while using each mode.
- The MSDC Mode allows you to access the files on the SD card via your computer.
- The Record Mode allows you to record videos, photos or audio.
4) After the camera is recharged, remove the USB cable and close the cover.
BATTERY LEVEL INDICATOR
When your camera is powered on, an icon indicating how much battery power remains can be
seen on the top left section of the LCD screen.
There are 4 icons indicating your battery power consumption level:
Full Battery
Two lattice – battery half full
One lattice – battery ¼ full
Empty Battery – recharge the camera
4