Table of Contents
Advertisement
The White Balance feature allows your
camera to adjust the coloring of the captured
images depending on the type of light source
in the current environment.
Properly adjusting the White Balance setting
to match your current environment will allow
the camera to properly balance the colors in
the images that are taken with your camera.
Exposure
The Light Exposure setting helps you control
the amount of light that enters your camera's
lens. This setting should be adjusted when
the environment is lighter or darker than
normal.
When the environment has more light than is
needed, reduce the exposure setting (by
using the negative - count) to reduce the
amount of light allowed into the lens by your
camera.
If the environment has less light (darker) than
is needed, increase the exposure setting (by
using the positive + count) to increase the
amount of light allowed into the lens by your
camera.
Driver Mode
Self-Timer Mode:
The Self Timer menu allows you to set a
delay between the time that the camera's
Shutter button is pressed and the actual
capture of the picture. This is an optimal
feature if you don't just want to take the
picture but would also like to be in the picture
yourself. Just set the Self Timer, press the
Shutter button on your camera and position
yourself in front of the camera as desired.
Burst Mode: When enabled, the 'Burst Mode'
feature allows you to take three rapid
snapshots in a row with a single click of the
Shutter button.
This feature can be effective when trying to
capture a particular moment in a sporting
event or other scenes with quick movements
Daylight
Cloudy
Fluorescent H
Tungsten
±2.0
±1.7
±1.3
±1.0
±0.7
±0.3
0 (Default)
Off (Default)
Self-timer 2S
Self-Timer 10S
Burst
33
White balance selected for
daylight surrounding.
White balance selected for
cloudy surrounding.
White balance selected for
fluorescent surrounding.
White balance selected for
tungsten lighting.
Selects and displays the
selected EV± value.
Displays the selected
Self-Timer or Burst setting.
OFF - Normal image capture
- one photo at a time
(Default). No icon appears
on the screen.
2S - Sets a 2-second delay
from when you press the
Shutter button until the photo
is taken.
10S - Sets a 10-second
delay from when you press
the Shutter button until the
photo is taken.
Burst - Captures three
continuous photos.
Advertisement
Table of Contents
