Initial Camera Setup - Vivitar ViviCam S425 User Manual

Initial Camera Setup

Installing the Battery
 To Charge the Battery:
1. Insert the battery as shown above.
2. Power off the camera.
3. Connect the camera using the
supplied USB cable to the computer's
USB port or to the AC Adapter (which
is then connected to a standard wall
socket).
4. Allow the battery to charge for at least
3 hours before using the first time.
5. The charge light will turn off when the
battery is fully charged.
Turning On the Camera
Installing the Memory Card
 SD Memory card (up to 32GB)
needed for normal use.
Using the Camera
4